Safety Shower Chiller SC300C

SC300C

Safety Shower Chiller SC300C

Safety Shower Chiller SC300C Self-contained chilled water storage and supply system providing TEPID water to emergency safety showers and eye/facewash stations in hot environments.

  • Includes an integral, factory-fitted, Flo-Thru eye/face wash safety shower that is fully flushed and self-draining.
  • Includes an automatic opening/closing stainless steel basin cover over the eye/face wash basin.
  • Includes a special AXIOM eye/face wash dispenser to flush debris away from the eyes.
  • Holds 315L of chilled water sufficient to cool 47oC water at 100L/minute for a minimum of 15 minutes.
  • Can be connected to up to six remote eyewash safety showers within a 100m radius
SKU SC300C Category: Tags ,

The Heat Trap Chillers are self-contained chilled water storage and supply system providing TEPID water to plumbed emergency safety showers and face/eye wash stations in hot environments.

 

Australian Standard AS4775 recommends a maximum water temperature for emergency safety showers and face/eye wash stations of 37.8ºC and a minimum delivery time of 15 minutes. TEPID water is defined as between 15ºC and 37.8ºC.

 

The Heat Trap SC300 Chillers are designed to provide TEPID water at a rate of up to 100 Liters/minute per shower with incoming potable feed water temperatures up to 47ºC. The Heat Trap Chillers are free standing self- contained units which can be plumbed into the supply line between the potable mains and the emergency safety shower and or face/eye wash station and connected with a single phase 10 amp 240V general purpose power outlet. Galvanized steel framing and seismic and cyclone rated bolt-downs ensure suitability for all industrial and mining applications.

  • Standalone self-contained chilled water storage and supply system for plumbed eyewash safety showers.
  • Complies with Australian Standard AS4775 to provide TEPID water (between 15ºC and 37.8ºC) for facewash/ eyebath facilities connected to potable water mains with supply temperatures up to 47ºC.
  • Operates with potable mains water pressures between 300 kPa and 650 kPa.
  • Built in recirculation cools the water in the piping between the chiller and the eyewash safety shower.
  • Chilled water storage at 5ºC and recirculation of cooled UV sterilized water eliminates the deadlegs and restricts bacterial growth.
  • Potable main deadleg to chiller flushed weekly through automatic dump valve
  • Cyclone and seismic rated design.
  • Single phase 10A 240V electrical supply.
  • The Heat Trap SC300 Chillers can service up
  • to four (4) eyewash safety shower units located within a 50 metre radius of the chiller unit.
  • Fail safe water flow
  • SC300, 300 Liter chilled water storage capacity is sufficient to supply 100 Liters/min of TEPID water for a minimum of 15 minutes when fed with incoming potable water up to 47ºC.
  • Chilled water storage at 5ºC and recirculation of cooled water through a UV sterilizer eliminates bacterial growth.
  • Eliminates water wastage from anti-scald valves at emergency safety showers.
  • Eyewash safety showers can be converted to be fully flushed by the mini-ringmain set up between the chiller and the eyewash safety showers.
  • Deluge Safety Shower and Facewash elements can be supplied factory fitted to the Chillers.
  • Chilled drinking water supply is available as an optional extra
Chilled water storage tank 300 litre vitreous enamel lined steel tank with replaceable sacrificial anode
Cold Expansion Relief valve RMC H75 850 kPa, 60KW
Chilled water storage temperature 6ºC + 2ºC
Skid mount framing 50mm x 2.5mm RHS Galvanised steel
Insulation Rigid polystyrene foam tank insulation and elastomeric pipe insulation
Refrigeration plant Heat Trap Solar + TCL
Refrigerant gas R410A
Refrigerant Separation Dual Stainless Steel / Copper heat exchangers
Temperature control Caleffi Temperature control valves
UV Sterilizer ADVANCE C100
Circulating pumps Lowara Vario D5 shaftless magnetic drive
Water Inlet/Outlet fittings G 1 1⁄4”
Recirculation fitting G 3⁄4”
Power consumption Maximum 4 amp
Maximum inlet pressure 650kPa
Minimum inlet pressure 350 kPa dynamic at 100 LPM
Dump solenoid Process Systems ES55-2-2-8V
Physical Dimensions W1,100*L1,100*H1,950
Weight 275 kg
  • This information is given in good faith but without warranty and is supplied to users based on our general experience and, where applicable, on the results of tests on samples of typical manufacture.
  • However, because of the many factors that are outside our knowledge and control that can affect the use of these products, we cannot accept liability for any injury, loss or damage resulting from the reliance upon such information.
  • Appropriate safety precautions should be taken to prevent bacterial growth in pipework dead legs
  • Innovation patent pending